It sounds like the ECC82 may have failed and has taken the PCB mounted (T80ma) fuse with it.
I'd get it in for a repair.
Search found 30 matches
- Fri Jul 06, 2012 3:26 pm
- Forum: HT-1
- Topic: ht-1 problem
- Replies: 18
- Views: 34725
- Fri Jun 22, 2012 1:21 pm
- Forum: HT-5
- Topic: HT5 Head and two cabs
- Replies: 4
- Views: 6012
Re: HT5 Head and two cabs
Hi,
No, the options are 1x16ohms or 1x8ohms or 2x16ohms.
No, the options are 1x16ohms or 1x8ohms or 2x16ohms.
- Thu Jun 21, 2012 3:44 pm
- Forum: HT Venue Series
- Topic: HT-20 EL34b?
- Replies: 5
- Views: 6736
Re: HT-20 EL34b?
Hi,
JJ EL34s will be fine but not sure who told you there is no trim pot as there is.
You should always adjust the bias when replacing power valves/tubes.
JJ EL34s will be fine but not sure who told you there is no trim pot as there is.
You should always adjust the bias when replacing power valves/tubes.
- Wed Jun 13, 2012 8:27 am
- Forum: HT Venue Series
- Topic: New HT 40 owner with a question
- Replies: 4
- Views: 6206
Re: New HT 40 owner with a question
Correct it should be plugged in the 1x16ohm output.
- Mon Jun 11, 2012 12:57 pm
- Forum: Blackstar Amps
- Topic: HT20 Major Issues!!!HELP
- Replies: 10
- Views: 15026
HT-20 Bias
Hi,
If you need to change the power valves/tubes then although the manual says it is cathode biased adjustment is req'd.
If you need to change the power valves/tubes then although the manual says it is cathode biased adjustment is req'd.
- Wed May 02, 2012 8:04 am
- Forum: HT Pedals
- Topic: Blackstar HT-20 Studio combo footswitch problem
- Replies: 8
- Views: 18724
Re: Blackstar HT-20 Studio combo footswitch problem
Return to point of purchase and ask for the correct one.
- Tue May 01, 2012 3:50 pm
- Forum: HT Pedals
- Topic: Blackstar HT-20 Studio combo footswitch problem
- Replies: 8
- Views: 18724
Re: Blackstar HT-20 Studio combo footswitch problem
I think you may have the wrong footswitch. We do a latching one with a LED and a momentary without.
The correct footswitch for your unit is a latching one with LED. Seems yours is momentary.
The correct footswitch for your unit is a latching one with LED. Seems yours is momentary.
- Tue May 01, 2012 8:39 am
- Forum: Blackstar Amps
- Topic: Do you really need to bias a Blackstar HT 1r amp?
- Replies: 1
- Views: 4149
Re: Do you really need to bias a Blackstar HT 1r amp?
No, there is no bias adjustment on the HT-1.
Cheers
Cheers
- Wed Apr 25, 2012 1:49 pm
- Forum: Blackstar Amps
- Topic: HT Stage 60 fuses
- Replies: 10
- Views: 14460
Re: HT Stage 60 fuses
Hi,
On the back of your amp it should say 'mains fuse T1.6A' - The 'T' stands for Timelag which is a slow blow. The HT fuse is also a Timelag, T630mA. Not sure where you got the 3A from?
Hope this helps.
On the back of your amp it should say 'mains fuse T1.6A' - The 'T' stands for Timelag which is a slow blow. The HT fuse is also a Timelag, T630mA. Not sure where you got the 3A from?
Hope this helps.
- Thu Apr 05, 2012 4:45 pm
- Forum: Blackstar Amps
- Topic: Jim Marshall
- Replies: 6
- Views: 7667
Re: Jim Marshall
Only Charlie Watkins left now!