Search found 41 matches

by Guitarzan
Mon Oct 24, 2011 2:29 am
Forum: Blackstar Amps
Topic: 110mV too high for biasing? (HT 100)
Replies: 6
Views: 11570

Re: 110mV too high for biasing? (HT 100)

UPDATE:

Ok, so 110mV IS DEFINITELY TOO HIGH.

My amp didnt blow up, but the sound all the sudden got quiet after I played loudly for a while. I put the amp back down to 100mV and all is well and it still sounds good.
by Guitarzan
Sun Oct 23, 2011 2:58 pm
Forum: Blackstar Amps
Topic: 110mV too high for biasing? (HT 100)
Replies: 6
Views: 11570

Re: 110mV too high for biasing? (HT 100)

majikmojo wrote:yes sir.. that is correct
So 110mV for a 4 tubed EL34 amp vs 75mV for a 2 tubed EL34 amp. 110 is still too high? Am I missing something?
by Guitarzan
Sun Oct 23, 2011 12:57 pm
Forum: Blackstar Amps
Topic: 110mV too high for biasing? (HT 100)
Replies: 6
Views: 11570

Re: 110mV too high for biasing? (HT 100)

that is pretty high...i ran mine up a few notches but that much - i think my tech said mine was around 75 now and with that i noticed a subtle difference - at that level i would certainly think tube life would be shortened somewhat if you are using it on a regular basis... 75 is for the HT 60 thoug...
by Guitarzan
Sat Oct 22, 2011 9:34 pm
Forum: Blackstar Amps
Topic: 110mV too high for biasing? (HT 100)
Replies: 6
Views: 11570

110mV too high for biasing? (HT 100)

I just re-biased my amp (HT 100). I've had for over a year and it has always sounded good, not great. I finally decided to check the bias and it was set under 90mV!! I cranked it all the way up to 110mV and it sounds GODLY.

Question is.. is that too high or do you think problems will arise?
by Guitarzan
Mon Jul 04, 2011 11:32 pm
Forum: HT Venue Series
Topic: HT 100 tubes - improving the sound
Replies: 30
Views: 45457

Re: HT 100 tubes - improving the sound

I hated my HT-100 at first. Then i did some modifications.. I replaced all my preamp tubes to GT's, gold connectors. The stock tubes are junk made by Tube Amp Doctor.. they don't even sell replacements that low grade of that brand either. Put all my effects in the loop except the wah and my Boss OD-...
by Guitarzan
Mon Jul 04, 2011 11:22 pm
Forum: HT Venue Series
Topic: My settings for eliminating harshness and thin sound of the overdrive channel on ht-40
Replies: 26
Views: 37741

Re: My settings for eliminating harshness and thin sound of the overdrive channel on ht-40

Preamp tube replacement makes a HUGE difference. The stock pre-amp tubes are junk. I put some Groove Tubes in there, gold connectors. The sound IS gold.
by Guitarzan
Mon Feb 21, 2011 4:57 pm
Forum: HT Venue Series
Topic: How does your Blackstar HT 40-60-100 sound in a live situtaion?
Replies: 6
Views: 12962

Re: How does your Blackstar HT 40-60-100 sound in a live situtaion?

Loud. Not the best clip, but I'm on the right side of the screen with an HT-100 into a Marshall 1960a Lead.

http://www.youtube.com/watch?v=D3Gx8GqnbO8

follow us on Facebook!

http://listn.to/Transfixed

by Guitarzan
Sat Jan 08, 2011 1:04 am
Forum: HT Venue Series
Topic: Replaced Tubes in my HT60
Replies: 9
Views: 12518

Re: Replaced Tubes in my HT60

What was the bias at when you put the new tubes in without adjusting it?
by Guitarzan
Mon Dec 27, 2010 4:26 pm
Forum: HT Venue Series
Topic: Amp with pedals
Replies: 16
Views: 17765

Re: Amp with pedals

Throw the delay in the loop and throw the Metal Zone in the trash. EQ and Noise Gate I would throw in the loop as well, otherwise it kills your tone. I don't knwo why you want a compressor, the HT-40 OD channels are compressed enough for that modern tone.
by Guitarzan
Mon Dec 27, 2010 4:14 pm
Forum: HT Venue Series
Topic: Getting AC/DC tone from the HT-40, here's my settings
Replies: 9
Views: 30986

Re: Getting AC/DC tone from the HT-40, here's my settings

I'll never understand why people want to dial in other guitarists tone. Be creative and dial in your own tone! Or else be destined to a life of playing covers!