Search found 38 matches
- Sun Mar 25, 2012 9:38 am
- Forum: Blackstar Amps
- Topic: New Blackstar product?
- Replies: 31
- Views: 38171
Re: New Blackstar product?
Will the new ID series put up with the higher volumes... Thats what i'm worried about. It sounds great so far... but...
- Wed Dec 14, 2011 8:47 am
- Forum: HT Pedals
- Topic: Volume drop HT-Dual
- Replies: 1
- Views: 12872
Volume drop HT-Dual
Hi guys, I bought me a HT-Dual some time ago. And the problem is that there isent coming any power out of the pedal. Very low volume. It is an older version, 16 V adapter, so i cant use the adapter from my Blackfire (22 V). Ive changed the tube inside but it didnt work. The volume is cranked up to m...
- Tue Oct 18, 2011 5:53 pm
- Forum: HT Venue Series
- Topic: Replacing tubes and Speakers?
- Replies: 30
- Views: 27612
Re: Replacing tubes and Speakers?
Im thinking about changing the preamp tubes from my Stage 60 and my Blackfire into JJ ECC803 and JJ ECC802... Will that be an improvement of my sound? I know that it depends on what i want, but from that, will it reduce feedback, low backgrond noise? Also im remodeling my pedalboard. Ive used my Bla...
- Mon Oct 17, 2011 9:58 am
- Forum: HT Blackfire
- Topic: Emulated Output
- Replies: 1
- Views: 23267
Emulated Output
Hi guys,
A question, is it possible to use a cab on the emulated output? Will there be sound? So to use de blackfire without an amp? Or will i damage the blackfire and/or the cab? The cab has an 2x12 8ohm load.
Thx
A question, is it possible to use a cab on the emulated output? Will there be sound? So to use de blackfire without an amp? Or will i damage the blackfire and/or the cab? The cab has an 2x12 8ohm load.
Thx
- Thu Sep 29, 2011 11:59 am
- Forum: HT Venue Series
- Topic: Lucky basterd
- Replies: 3
- Views: 5718
Lucky basterd
Hello guys, I was playing my guitar and after a while the powertubes died. I had TAD installed, and they lived for about one year. So I just came back from the store to install the new tubes (groove tubes). And with biassing i forgot which resisters i used to measure the voltages. So i accidentialy ...
- Sat Aug 20, 2011 7:30 am
- Forum: HT Venue Series
- Topic: HT 60 Stage with strange noise
- Replies: 10
- Views: 11805
Re: HT 60 Stage with strange noise
Grounding problem... For sure
- Mon Aug 01, 2011 11:51 am
- Forum: HT Venue Series
- Topic: Bias settings for everyone
- Replies: 13
- Views: 16110
Re: Bias settings for everyone
You are making me doubt the graph if its applicable for blackstar settings... i will have to do some more research on this. Please dont use the graph until i verify it is usealbe with the blackstar stuff...
DAMN!....
DAMN!....
- Mon Aug 01, 2011 10:40 am
- Forum: HT Venue Series
- Topic: Bias settings for everyone
- Replies: 13
- Views: 16110
Re: Bias settings for everyone
Yep, you are correct. 240V should be in the Europe section.
Yep, right again, 26-38 is again correct. It is possible to have a stock setting of 25 mA per tube. Maybe Blackstar wanted to have the setting a little bit on the cold side... possible?
Yep, right again, 26-38 is again correct. It is possible to have a stock setting of 25 mA per tube. Maybe Blackstar wanted to have the setting a little bit on the cold side... possible?
- Mon Aug 01, 2011 7:34 am
- Forum: HT Venue Series
- Topic: ..and another stage 60 issue
- Replies: 5
- Views: 7222
Re: ..and another stage 60 issue
The crackling noise almost sounds like a grounding problem of the amp...
- Mon Aug 01, 2011 7:29 am
- Forum: HT Venue Series
- Topic: Bias settings for everyone
- Replies: 13
- Views: 16110
Re: Bias settings for everyone
Hellow, How do you read it? Well, let me explain: - First you need to know which tubes youve got. If you know that, then use one of the charts. Above for EL34,6L6,5881,KT66 and KT77. And below for KT88,KT90 and 6550. - Then you choose your location. So US, Europe, Japan. This is because there are di...