Search found 16 matches
- Sun Jul 26, 2020 1:34 am
- Forum: Studio 10 Series
- Topic: Change KT88 with EL34 on Studio 10?
- Replies: 2
- Views: 15510
Re: Change KT88 with EL34 on Studio 10?
The tube change might need some components changed to achieve the proper output tube bias, but such technical details aren't released by Blackstar. The case designs are so close, I would be surprised if you couldn't swap out the amp chassis's between the two to get the color you want with the amp yo...
- Fri May 08, 2020 1:43 am
- Forum: ID:Core High Power - ID:Core 100 and ID:Core 150
- Topic: Factory Speakers in the ID:Core 100
- Replies: 2
- Views: 8448
Re: Factory Speakers in the ID:Core 100
When I went looking for possible speaker upgrades for my ID Core 150, I found someone's post online that showed these speakers were in their Core ID 100 http://www.kicschunil.com/product_detail.asp?id=310 50W 8ohm speakers.
- Sat Nov 30, 2019 11:40 pm
- Forum: ID:Core High Power - ID:Core 100 and ID:Core 150
- Topic: speaker change for core high power
- Replies: 1
- Views: 9955
Re: speaker change for core high power
This weekend I replaced the G10Ns with a pair of used Celestion G10 Vintage 8ohm drivers which seem to work well in the Core high power 150.
- Sun Oct 27, 2019 2:40 am
- Forum: ID:Core High Power - ID:Core 100 and ID:Core 150
- Topic: speaker change for core high power
- Replies: 1
- Views: 9955
speaker change for core high power
Someone asked a while back what speakers they could use in an ID Core High Power, so here's my experience. I had previously used a core ID:20 when I found a good price on the Core High Power stereo amp, but I was always a little disappointed in the sound of using either of the core stereo amps as "a...
- Sun Oct 27, 2019 1:25 am
- Forum: Blackstar Amps
- Topic: Silverline 1/8 out to PA?
- Replies: 1
- Views: 2589
Re: Silverline 1/8 out to PA?
It should be the same as connecting a tablet or smartphone to the PA.
something like Hosa HMP-010Y REAN 3.5mm TRS to Dual 1/4" TS Pro Stereo Breakout Cable
something like Hosa HMP-010Y REAN 3.5mm TRS to Dual 1/4" TS Pro Stereo Breakout Cable
- Wed Jan 25, 2017 5:52 pm
- Forum: Blackstar Amps
- Topic: Problem with ID:CORE 40 - usb disconnecting
- Replies: 2
- Views: 4721
Re: Problem with ID:CORE 40 - usb disconnecting
Folks have occasionally reported their flakey USB problems going away with a cable swap.
I would try another cable. If you're running the latest insider software from http://blackstarinsider.co.uk/ it should tell you if it wants to do a firmware update, when it detects the amp.
I would try another cable. If you're running the latest insider software from http://blackstarinsider.co.uk/ it should tell you if it wants to do a firmware update, when it detects the amp.
- Tue Jan 24, 2017 10:11 pm
- Forum: Blackstar Amps
- Topic: Patches only for tvp amps not for Id core 150
- Replies: 1
- Views: 3808
Re: Patches only for tvp amps not for Id core 150
I thought the same when I had purchased the ID core 20, as a brand new amp a couple years ago. It was so new and had so few users that there weren't any presets online for it specifically, just old TVP models. I haven't looked recently to see what is available now. I moved on because I wanted a more...
- Sat Jan 07, 2017 9:29 pm
- Forum: Blackstar Amps
- Topic: ID:CORE 20 no sound
- Replies: 4
- Views: 6744
Re: ID:CORE 20 no sound
I'd try another cable as well, but that sounds like a defective amp to me.
- Thu Oct 20, 2016 8:56 pm
- Forum: Blackstar Amps
- Topic: Blackstar Amp ID Core 20 with Fender Electric Accoustic
- Replies: 1
- Views: 3788
Re: Blackstar Amp ID Core 20 with Fender Electric Accoustic
While its not a an acoustical guitar amp, I'd expect some signal to make it through to the Core20 amp. I don't know that particular guitar, so I googled it. It looks like it has a fishman acoustical guitar bridge piezo pickup and preamp/tuner built in. I have a guitar with one of those. If there's n...
- Tue Mar 15, 2016 1:52 am
- Forum: ID:Series
- Topic: id core 10 usb not recognised
- Replies: 11
- Views: 62425
Re: id core 10 usb not recognised
I haven't tried Windows 10 with my ID:Core 20 yet, but the usual advice for Windows missing USB drivers issue is to try plugging into different USB ports and restarting the computer. Beyond that there's fiddling with allowing unsigned drivers.