HT Stage 60 Channel 1 fault
My stage 60 channel one has failed, when channel 1 is selected its feeding back badly and is unusable, channel 2 and the clean channel are fine, so i obviously need to replace a valve, only problem is which one? ive looked in the back and all the valves are glowing so i cant diagnose a bad valve, anybody know which valves relate to only channel 1?
That would be great cheersmajikmojo wrote:78....
i have the positions at home (i'm at work right now) - if nobody answers i'll have it for you in a little while
i cant remember off the top of my head and dont want ot mis - inform you....
here you go:
the pre amp tubes are ordered in the following manor: furthest from the power amp tube to closest to power amp tubes are:
V1: 12ax7 (Ecc83)
V2: 12ax7 (Ecc83)
V3: 12au7 (Ecc82) this the closest pre amp tube to the power tubes, it is a phase inverter mainly governs the clean channel.
the pre amp tubes are ordered in the following manor: furthest from the power amp tube to closest to power amp tubes are:
V1: 12ax7 (Ecc83)
V2: 12ax7 (Ecc83)
V3: 12au7 (Ecc82) this the closest pre amp tube to the power tubes, it is a phase inverter mainly governs the clean channel.
Cheers for that majikmojo, i can get that sorted today now thank you.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 20 guests