V1 PREAMP TUBE

Discussion - HT Venue amplifiers. Inspiration from Studio to Stage.
Post Reply
DreamTheater
Posts: 20
Joined: Thu Dec 03, 2015 11:08 pm

Sun Jan 31, 2016 1:54 pm

Which tube is the V1 in the HT 40
Top
User avatar
thephantum
Posts: 1160
Joined: Wed Jan 29, 2014 7:42 pm
Location: Virginia, United States

Sun Jan 31, 2016 6:27 pm

When you open up the back of the amp, the preamp valve closest to you is V1/the clean channel (i.e - the valve towards the back of the chassis). The one furthest away from you is V2/the OD channel (the one closest to the front of the chassis).
Top
DreamTheater
Posts: 20
Joined: Thu Dec 03, 2015 11:08 pm

Sun Jan 31, 2016 8:27 pm

Ok Great! So that leads me to believe that each tube is independent from one another and that no cascading gain exists. (Changing V1 to a lower gain tube has no effect on the OD Channel and that V2 has no effect on the clean channel ). Is this correct?
Top
User avatar
thephantum
Posts: 1160
Joined: Wed Jan 29, 2014 7:42 pm
Location: Virginia, United States

Sun Jan 31, 2016 9:04 pm

DreamTheater wrote:Ok Great! So that leads me to believe that each tube is independent from one another and that no cascading gain exists. (Changing V1 to a lower gain tube has no effect on the OD Channel and that V2 has no effect on the clean channel ). Is this correct?
That's correct.
Top
Post Reply

Return to “HT Venue Series”

  • Information

  • Who is online

    Users browsing this forum: Bing [Bot] and 10 guests