Pedal setups

[Markm]

If anyone can add I love to hear how everyone has their pedals set up.

I have a Boss DD3 and MRX 6-band EQ in the loop.

Out front I have a Morley Bad Horsie Wah, and Korg Pitchblack Tuner.

I am thinking about adding some new effects in the near future.

I think it would be cool to see what everyone else has and how they are set up.

Thanks!!

[majikmojo]

here's my general set up:

mxr eq in the loop - really does a nice job of balancing the tones

out front:

cry baby wah,boss compressor (i dont use this all the time-depends on the guitar),OCD distortion,Boss BD1 blues driver (used as a boost pedal mostly),Boss chorus,Boss delay - can you tell i like Boss pedals - all mounted in a powered Boss pedalboard

i might add that i am using less of the distortion pedals as i have dialed in the OD1 and OD2 channels on the amp and find the gain quite acceptable for the music i'm playing (mostly classic rock) with a gibson L6-S and a Strat

i have read that many say this amp HT60 does not do classic rock that well - i find that to be poppycock - it does quite well for me and the chorus and delay on the clean channels sparkles and sounds nice and glassy

[KKND]

Guitar--->TC Polytune--->EHX Compressor--->Crybaby--->MXr GT-OD--->NS-2--->input--->fx send--->boss CE-5--->Boss DD7--->MXR 10band eq--->fx return

You need a chorus

[Markm]

Guitar--->TC Polytune--->EHX Compressor--->Crybaby--->MXr GT-OD--->NS-2--->input--->fx send--->boss CE-5--->Boss DD7--->MXR 10band eq--->fx return

You need a chorus

Chorus is next on my list for sure!

[ffooxx]

Setup in my signature

[auburnshredder]

Here is my setup for the HT-20...nothing through the loop at this point. I am adding a tap tempo switch for the DD7.

[majikmojo]

same pedal board i use shredder...works great for me - i wish the lid was hinged though instead of those goofy pop in pins

[auburnshredder]

Yeah, not the best design with the lid, but I really like the functionality of the board otherwise.

I have become a big fan of the V-wah, lots of flexibility

[KKND]

I really need to get me a pedal board.

[gypsyblues73]

BOSS TU-3 tuner, Morpheus Drop-tune, Morley Dragon 2 wah, MXR GT-OD (or the ZW-44, or BOSS Power Stack, I alternate between them), Red Witch Fuzz God II, Pigtronix Mothership, and in the loop I have an MXR EQ, MXR ZW-38 chorus, BOSS DD-7 delay, and Digitech Turbo Flanger. I was using another MXR EQ in my chain to get a lead boost until I discovered the handy-dandy footswitch input in the back to change the OD2 voicing, so I got a $20 latching footswitch for that. I also have an ISP Decimator G-String noise gate, since when I initially got my Stage 60 it was a bit noisy, but oddly enough, with even more pedals going into it now, it's much quieter! So I don't even use the noise gate. It's all run through a powered Furman SPB-8C board.