Page 1 of 1
External Switching Mode vs. Normal/Footswitch mode
Posted: Sat Aug 20, 2022 6:24 am
by rapdup
I recently connected the 2-way footswitch socket of an HT Club 50 MkII to an external switcher (G3). According to the owner's manual (pg. 12), there are two footswitching modes: normal/footswitch mode and external switching mode. I have tested out both modes with the external switcher and the amp; they behave exactly the same (i.e. as expected)
This begs the question, what is the difference between the two. Anyone have an idea? Thx!
Re: External Switching Mode vs. Normal/Footswitch mode
Posted: Mon Nov 13, 2023 2:58 pm
by sev1sicks
I believe "external" is for aftermarket foot pedal channel select. So not Blackstar brand.
Re: External Switching Mode vs. Normal/Footswitch mode
Posted: Mon Apr 15, 2024 10:47 am
by bacocax
rapdup wrote: ↑Sat Aug 20, 2022 6:24 am
I recently connected the 2-way footswitch socket of an HT Club 50 MkII to an external switcher (G3). According to the owner's manual (pg. 12), there are two footswitching modes: normal/footswitch mode and external switching mode. I have tested out both modes with the external switcher and the amp; they behave exactly the same (i.e. as expected
slope game)
This begs the question, what is the difference between the two. Anyone have an idea? Thx!
I agree with you