HT Stage 60 channel switching with Boss ES5
Posted: Sat Sep 17, 2022 7:38 am
Hi there,
Has anyone had much success with programming a Boss ES5 to handle the channel switching on an HT Stage series amp? I have an HT Stage 60 212 with the four button channel switcher that connects using the 9 pin VGA-style connector. I've connected to the ES5 using a Champion HT Interface (https://www.championpedals.com/htampinterface.html) which connects to the ES5's control outs with TRS connectors. The trouble I'm having is that I can't seem to get the programming of the switching working correctly. I have the control 1/2 working to switch between clean and OD1 but as soon as I plug the control 2 TRS in, the switching goes a bit haywire.
I'd appreciate any help.
Thanks in advance.
Has anyone had much success with programming a Boss ES5 to handle the channel switching on an HT Stage series amp? I have an HT Stage 60 212 with the four button channel switcher that connects using the 9 pin VGA-style connector. I've connected to the ES5 using a Champion HT Interface (https://www.championpedals.com/htampinterface.html) which connects to the ES5's control outs with TRS connectors. The trouble I'm having is that I can't seem to get the programming of the switching working correctly. I have the control 1/2 working to switch between clean and OD1 but as soon as I plug the control 2 TRS in, the switching goes a bit haywire.
I'd appreciate any help.
Thanks in advance.