HT1R emulated output in mono

Discussion - HT-1 amplifiers
Post Reply
RockNRollBanana
Posts: 6
Joined: Sat Aug 13, 2011 12:00 am
Location: France

Sat Aug 13, 2011 11:47 pm

Hi Everybody
I'm a new user of HT1R combo and totally love it :)

I only have a small doubt : my emulated output is in mono ( only one hear in my headphone ).
The HT1R is not supposed to be stereo with emulated output ?

Thank's !

User avatar
Uffingdon
Posts: 45
Joined: Wed May 04, 2011 12:00 am
Location: Far Side Of Nowhere

Sun Aug 14, 2011 2:48 pm

My HT1-R emulated output is in stereo, you notice it more when using a bit of reverb.

My guess is your headphone jack and the output socket are not making good contact as your only hearing it on one side. Image

Uff.

RockNRollBanana
Posts: 6
Joined: Sat Aug 13, 2011 12:00 am
Location: France

Sun Aug 14, 2011 8:04 pm

Hi !
Thanks for your answer.
I try with several headset ( through jack 6.35 to 3.5 adapter ) , I always have only one channel, I have another smal amp for my bass with head set output, and all works with it ( with the same adapter )
Perhaps it's a small issue, but I think I will not send it back just for that :)

User avatar
Uffingdon
Posts: 45
Joined: Wed May 04, 2011 12:00 am
Location: Far Side Of Nowhere

Sun Aug 14, 2011 8:47 pm

OK so that pretty much confirms it's a problem with the output socket, you could try some contact cleaner and see if it cures it!

Keep us posted if you solve the problem.

I use the output all the time for recording, I couldn't live without it :!:


RockNRollBanana
Posts: 6
Joined: Sat Aug 13, 2011 12:00 am
Location: France

Sun Aug 14, 2011 9:47 pm

Thanks for the advices, I will post news later.
But I think it could be a wire intern problem ( the amp is brand new ).
I bought it to have a nice little amp but also for the output, if it's stay in mono, it's fine, but that's pitty for the stereo reverb ...
Thanks again.

RnRB.

RockNRollBanana
Posts: 6
Joined: Sat Aug 13, 2011 12:00 am
Location: France

Mon Aug 15, 2011 9:54 am

Ok, I've clean the plug with special conector cleanser, and try to move the inside the plug but nothing.
The only thing is I have 2 ways sound when I plug back a little bit ( around 3 or 4 milimeters ), but I presume it's the sound of the one wich works, which goes in to the both channels.

I will ask my reseller if it's complicated to make work the warranty, if it is so, I will keep it like that.

-RnRB

RockNRollBanana
Posts: 6
Joined: Sat Aug 13, 2011 12:00 am
Location: France

Tue Aug 23, 2011 9:28 am

I've got a new one from my reseller, and it's perfect.
I even notice the sound is better overall, less noise, more compression and the stereo line out :)
The first one could be defective, not only for the line out.

So right now, I'm fully happy :)

RNRB.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 31 guests