Hi Everybody
I'm a new user of HT1R combo and totally love it
I only have a small doubt : my emulated output is in mono ( only one hear in my headphone ).
The HT1R is not supposed to be stereo with emulated output ?
Thank's !
HT1R emulated output in mono
-
- Posts: 6
- Joined: Sat Aug 13, 2011 12:00 am
- Location: France
Hi !
Thanks for your answer.
I try with several headset ( through jack 6.35 to 3.5 adapter ) , I always have only one channel, I have another smal amp for my bass with head set output, and all works with it ( with the same adapter )
Perhaps it's a small issue, but I think I will not send it back just for that
Thanks for your answer.
I try with several headset ( through jack 6.35 to 3.5 adapter ) , I always have only one channel, I have another smal amp for my bass with head set output, and all works with it ( with the same adapter )
Perhaps it's a small issue, but I think I will not send it back just for that
OK so that pretty much confirms it's a problem with the output socket, you could try some contact cleaner and see if it cures it!
Keep us posted if you solve the problem.
I use the output all the time for recording, I couldn't live without it
Keep us posted if you solve the problem.
I use the output all the time for recording, I couldn't live without it
-
- Posts: 6
- Joined: Sat Aug 13, 2011 12:00 am
- Location: France
Thanks for the advices, I will post news later.
But I think it could be a wire intern problem ( the amp is brand new ).
I bought it to have a nice little amp but also for the output, if it's stay in mono, it's fine, but that's pitty for the stereo reverb ...
Thanks again.
RnRB.
But I think it could be a wire intern problem ( the amp is brand new ).
I bought it to have a nice little amp but also for the output, if it's stay in mono, it's fine, but that's pitty for the stereo reverb ...
Thanks again.
RnRB.
-
- Posts: 6
- Joined: Sat Aug 13, 2011 12:00 am
- Location: France
Ok, I've clean the plug with special conector cleanser, and try to move the inside the plug but nothing.
The only thing is I have 2 ways sound when I plug back a little bit ( around 3 or 4 milimeters ), but I presume it's the sound of the one wich works, which goes in to the both channels.
I will ask my reseller if it's complicated to make work the warranty, if it is so, I will keep it like that.
-RnRB
The only thing is I have 2 ways sound when I plug back a little bit ( around 3 or 4 milimeters ), but I presume it's the sound of the one wich works, which goes in to the both channels.
I will ask my reseller if it's complicated to make work the warranty, if it is so, I will keep it like that.
-RnRB
-
- Posts: 6
- Joined: Sat Aug 13, 2011 12:00 am
- Location: France
I've got a new one from my reseller, and it's perfect.
I even notice the sound is better overall, less noise, more compression and the stereo line out
The first one could be defective, not only for the line out.
So right now, I'm fully happy
RNRB.
I even notice the sound is better overall, less noise, more compression and the stereo line out
The first one could be defective, not only for the line out.
So right now, I'm fully happy
RNRB.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 3 guests