HT-Dual clean channel very low volume

Discussion - HT Pedals. Heavenly Boxes.
Post Reply
Posts: 3
Joined: Tue Sep 23, 2014 10:52 pm

Tue Sep 23, 2014 11:05 pm

i just bought a new HT-Dual pedal from an online store in Italy.
Today i have tested for the first time the pedal and i just found a problem with the channel 1 in CLEAN mode.
Volume signal very very low....i have to put the level at 10 on the pedal, for earing a signal at the same level of the clean channel of the amp when pedal is not engaged.
If i use the channel 1 in CRUNCH mode the volume is ok...very loud...and the same on channel 2.
I tried the pedal with 2 one of these i tried to put on Return of fx loop too...there is always very very low signal for clean.
I think it's not the tube...because the sound of crunch and overdrive are very good.
Does anybody help me please?

Posts: 4
Joined: Tue Jul 28, 2015 3:51 am

Tue Jul 28, 2015 3:59 am

Hi, Baraja

I have the same problem with my HT Dual pedal, very low volume on clean channel compare to crunch channel, and it's so easy to break up.
I wonder if you have solve your problem, if you do please share with me. thx in advance

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest