Guys, a little help. I own a Power Brick from MXR/ Dunlop. It has a 18 V output (3 with this voltage). Can I use this inside my HT Dual ?
I ask this because the new manual says that the voltage of HT dual is 22 V...
So, there is another version of HT dual (my manual says 16 V) ? The HT Dual supports as 18 V ??
Thanks a lot
Question about HT Dual power supply...
Yes,there is a new version which has 22 volt DC input whereas the old version was 16 volt AC. Since your manual mentions 16 volt you have the older version which requires a 16 volt AC input. Since most third party bricks are DC you cannot use them, and in addition, 18 volt would be too high for your pedal. You eoul need a simply that provides 16 volt AC
-
- Information
-
Who is online
Users browsing this forum: No registered users and 38 guests