Hello there all.
I'm new to the forum
Just got my (used) HT60 Soloist and i'm really thrilled with the tones it can produce. The footswitch also is veeery handy.
I'm into garage/post punk/punk with the band i'm playing with. As I have already sold (you know why) my Vox Tonelab LE, I'm focusing now on getting some (single) effect pedals.
To be more specific first of all I need a flanger (MXR, electric mistress, or the mooer copy of it?) and a delay (memory boy deluxe?). I don't think i'll need more overdrive/distortion with this little beast.
Have you used successfully any of the pedals mentioned above or any others that cooperated nicely with the HT60? I'm not so experienced with single pedals and i really want to avoid "digitalizing" the tone of the HT 60.
Thanks in advance lads and ladies.
Nice to find you around
FX Pedal(s) suggestion(s) for the HT 60 Soloist
- thephantum
- Posts: 1160
- Joined: Wed Jan 29, 2014 7:42 pm
- Location: Virginia, United States
Personally, I use an MXR-117R flanger and a Echo Puss Analog Delay. For the record, my current pedal chain config is fairly simple:
Crybaby=>Amp input
Then in the FX Loop:
Boss BD-2 (modded)=>MXR=>Echo Puss=>Volume Pedal
It doesn't matter what amp I use, the pedal rig sounds awesome in that configuration. I use the BD-2 as a solo boost and only use the Flanger here and there, but the delay is almost always on with a very short duration echo to fatten things up. The Crybaby in front and volume pedal at the end are self explanatory.
Crybaby=>Amp input
Then in the FX Loop:
Boss BD-2 (modded)=>MXR=>Echo Puss=>Volume Pedal
It doesn't matter what amp I use, the pedal rig sounds awesome in that configuration. I use the BD-2 as a solo boost and only use the Flanger here and there, but the delay is almost always on with a very short duration echo to fatten things up. The Crybaby in front and volume pedal at the end are self explanatory.
Thanks for your reply thephantum. I have used an MXR micro flanger and really enjoyed it's "chorusy" sound (not ultra...jet mode, if you know what i mean). But I don't know the Echo Puss. Should give it a go maybe. And yes indeed a wah is on the list too.thephantum wrote:Personally, I use an MXR-117R flanger and a Echo Puss Analog Delay. For the record, my current pedal chain config is fairly simple:
Crybaby=>Amp input
Then in the FX Loop:
Boss BD-2 (modded)=>MXR=>Echo Puss=>Volume Pedal
It doesn't matter what amp I use, the pedal rig sounds awesome in that configuration. I use the BD-2 as a solo boost and only use the Flanger here and there, but the delay is almost always on with a very short duration echo to fatten things up. The Crybaby in front and volume pedal at the end are self explanatory.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 2 guests