HELP - Live Logic 6 - Abelton Live 11 Record Button mapping issue

Specific posts about certain Blackstar products.
Post Reply
mottetatoj
Posts: 1
Joined: Mon May 31, 2021 1:26 am

Mon May 31, 2021 1:35 am

Hi need some help please.

Just received my unit, and I am baffled.
I have mapped the PLAY, STOP, & RECORD buttons to the Live Logic 6 but have an issue with ONLY the RECORD mapping.
The STOP and PLAY work as they should, however, the RECORD acts like a momentary button.
When you press the pedal button assigned to RECORD, recording only occurs when the footswitch is pressed/engaged, and when you lift your foot, Abelton continues in PLAY mode.
I confirmed this is set to TOGGLE, but for the life of me cannot figure out what is going on.

See below my settings.
I have upgraded firmware to current.
I have tried it on various footswitch positions, still the same result.

Again, PLAY and STOP are configured the same way and work fine.

Please help, driving me a bit nuts.

CC
MIDI Channel = 1
CC Message Number = 3
Operation = TOGGLE
On Value = 0
On Value = 1

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 6 guests