Tone:Link Bluetooth Receiver - Loud pops

Specific posts about certain Blackstar products.
Post Reply
Puzzling user
Posts: 1
Joined: Thu Jun 24, 2021 9:14 am

Thu Jun 24, 2021 9:45 am

There are multiple loud pops during operation when it is connected to powered speakers without LF/DC cut-off.

Without exact measurements, but after some tinkering, it seams that the line out signal is not stable between or at power-on/off, resume/enter sleep mode, connect/disconnect and bluetooth pairing operations.

This is probably fixable in software but I have not found any firmware updates.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 8 guests