Official Blackstaramps Forum

help please,
purchased amped 3 used live twice, straight into pa, amazing noise

at home connected to blackstar cabinet volume is very low, what am i doing wrong

many thanks
Percy

It seems like you're experiencing low volume when connecting your amplifier to fnaf your Blackstar cabinet at home. Here are a few things you can check to troubleshoot the issue:

Check the volume settings on your amplifier: Make sure the volume control on your amplifier is turned up to an appropriate level. Sometimes, when using different setups or equipment, the volume settings need to be adjusted accordingly.

Verify the speaker cable connection: Ensure that the speaker cable is securely connected between your amplifier and the Blackstar cabinet. Loose or faulty connections can result in low volume or loss of signal.

Check the impedance matching: Ensure that the speaker output impedance of your amplifier matches the impedance of your Blackstar cabinet. Mismatched impedance can lead to a decrease in volume. Refer to the manuals of both your amplifier and cabinet to confirm the proper impedance settings.

Check the speaker configuration: If your Blackstar cabinet has multiple speaker outputs, ensure that you have connected the amplifier to the appropriate output. Some cabinets offer different configurations or speaker combinations, so double-check the manual for the correct setup.

Test with different cables and equipment: If possible, try using different cables or connecting your amplifier to a different speaker cabinet to see if the issue persists. This can help identify if the problem lies with a specific component.

If you've checked these aspects and are still experiencing low volume, it might be worth consulting with a professional technician or contacting the manufacturer's customer support for further assistance. They will have specialized knowledge and can guide you through specific troubleshooting steps for your equipment.

percyslice wrote: ↑

Tue May 16, 2023 4:51 pm

help please,
purchased amped 3 used live twice, straight into pa, amazing contexto noise

at home connected to blackstar cabinet volume is very low, what am i doing wrong

many thanks
Percy

Hi Percy,
You should check for an impedance match between the Ampeg 3 amp and the Blackstar cabinet, and ensure that the amp's power output settings are maximized for optimal volume.

basket random

percyslice wrote: ↑

Tue May 16, 2023 4:51 pm

help please,
purchased amped 3 used live twice, straight into pa, amazing noise

at home connected to blackstar cabinet volume is very low, what am i doing wrong

many thanks
Percy

Try connecting the Ampeg amplifier to a different speaker cabinet or using a different amplifier with the Blackstar cabinet. This can help you determine if the issue lies with the amplifier, cabinet, or their compatibility.

By systematically checking these aspects, you should be able to identify and address the problem with the low volume when connecting your amp to the Blackstar fnaf cabinet. If the issue persists, it's a good idea to seek help from a professional technician who can diagnose and fix any technical problems.

Confirm that the impedance of your Blackstar cabinet matches watermelon game the impedance rating of the Amped 3. Mismatched impedance can result in a significant loss of volume.

Ensure that the speaker cable is securely connected between your amp Geometry Dash and the Blackstar cabinet. A loose or faulty connection can result in a loss of signal and reduced volume output.

Accessibility is key - snake io is availability on multiple platforms ensures that anyone can join in on the fun, anytime and anywhere.