Latest MIDI Implementation Chart for ID Series

[CuztardPi]

For those interested, & in light of the fact that B* have not yet provided one, I've marked up the old MIDI chart (dated : 11-07-12!!!) with all the recent additions & amendments (as well as providing a key to the various value meanings)(AFAIK).

I hope someone finds this useful
https://www.dropbox.com/s/v3i13zuh01ovn ... I.pdf?dl=0
http://www.adrive.com/public/7kqW72/ID2 ... 20MIDI.pdf
http://we.tl/WWF0mnMYC4


Cheers

[Actionman]

KILLER!
Big thanks dude...much appreciated

[cadblaster]

Cuztard, I really appreciate that.
It's sad we have to do Blackstar's work for them.

[Graphicon]

KUDOS to you Sir - much appreciated

[CuztardPi]

I've had a request (Hi Myk) to repost this listing of all the various MIDI PC & CC that apply to the ID series ... so, as i said:

For those interested, & in light of the fact that B* have not yet provided one, I've marked up the old MIDI chart (dated : 11-07-12!!!) with all the recent additions & amendments (as well as providing a key to the various value meanings)(AFAIK).

https://www.dropbox.com/s/v3i13zuh01ovn ... I.pdf?dl=0
http://www.adrive.com/public/7kqW72/ID2 ... 20MIDI.pdf
http://we.tl/WWF0mnMYC4

Note - this has not been changed since I 1st posted it back in Oct 2014.

Cheers - Steve

[myk.robinson]

Thanks to @cuztardpi.

I reshared on the UNOFFICIAL Blackstar Community fora few users there who have been having issue with the FS10.

https://plus.google.com/u/0/communities ... 1548320732

[myk.robinson]

Can you clarify the CC to recall patches? I can see that you would pass a value of 0-127 to recall patch 1-128, but I don't see the CC# to assign the value to. Perhaps I am misreading the chart, though. MIDI makes my brain hurt...

Thanks,

[cadblaster]

Thanks again CuztardPi for doing Blackstar's job for them.
I keep a copy of your chart taped to the bottom of my Midi Controller

[CuztardPi]

Can you clarify the CC to recall patches? I can see that you would pass a value of 0-127 to recall patch 1-128, but I don't see the CC# to assign the value to. Perhaps I am misreading the chart, though. MIDI makes my brain hurt...

To answer Myk's question & for reference purposes for those interested:
The 128 different patches on the Amp are called up by sending an appropriate PC (Program Change) with a value 1 to 128 (= 0 to 127)
i.e. a CC is not used to change patches on the amp.

Note: sending data on CC119 (any data value will do) is used to save the current patch (on the amp in the previously selected, current patch location: 1 to 128)

PS. My brain always hurts when someone mentions MIDI ... I am only a lowly guitarist after all, who likes things simple

[belmont brown]

CuztardPi - you're posts so far on this have been invaluable - thanks.
As a total MIDI novice I recently picked up a FCB1010 as - like others - I too couldnt get on with the B* footswitch in a live setting with my ID60TVP head.

I've changed the FCB to the Uno chip, done all the suggested resets and changed my amp's midi to channel 1 using insider.

So (after a few hours of brainache) I managed to figure out how to load your sysex file into my FCB. It all now seems to be functioning as you intended except - the fx on the amp are all switched off when I change from one patch to another using the FCB.

If I call the patch up on the amp's control panel, the fx are there. If I use the FCB they're all off. Is there something obvious I've missed?

To be cheeky - is it also easy to assign the first expression pedal to delay level instead of mod rate?

Thanks in advance...