Need help from ID:CORE 20 and 40 owners

[silencer666]

Hi there,

I'm a proud owner of a ID:CORE 10 despite the fact that it was an impulse buy due to a very convincing salesman.

I have only one problem with the amp - I can't use the footswitch function, which is only available on 20 and 40.

However, I think the 10 can be modified in order to use the F-11 footswitch.

I am convinced that the PCB is the same for all three amps and I would appreciate it if someone can undo SIX screws on the top console, flip it over, and take a photograph of the corner of the PCB nearest to the power supply input, for reference.

Photo of ID CORE 10 PCB courtesy of @vitalitask+1960


Thank you very much in advance.

[Tomassen]

UP! I ask about the same, also thinking of moderating my ID10

[old_emu]

Hello!

"...However, I think the 10 can be modified in order to use the F-11 footswitch..."

Yes, I also think so. It seems to be this way, and I also had this thought of modifying an ID:CORE10.

Would be great to get Info out of one of the big brothers.