Hi folks. Those of you with an amp from the Blackstar ID series might be interested in this little project of mine. Since the Insider software doesn't support Linux, I decided to create my own GUI program for controlling the amp. It's still under development, but can already control the main amplifier controls. It's developed in Python, using PyQt5 and PyUSB - feel free to send patches
https://github.com/jonathanunderwood/outsider
Outsider: a new GUI for controlling ID series amps
- myk.robinson
- Posts: 253
- Joined: Mon Oct 22, 2012 7:02 pm
- Contact:
Awesome. May have to give this a shot with my Antergos laptop
Thanks for this - was wondering whether I was going to have to write something myself (only have Linux) but you have saved a lot of effort (and I'm C/C++, not Python so this gives me a good excuse to examine code and learn something!)
Running on Ubuntu 15.04, needed to install python3-pyqt5 rather than python3-qt5, but apart from that seems to work fine. Will probably try and get it going on a Raspberry Pi at some point, which might be a good option.
James
Running on Ubuntu 15.04, needed to install python3-pyqt5 rather than python3-qt5, but apart from that seems to work fine. Will probably try and get it going on a Raspberry Pi at some point, which might be a good option.
James
Thanks so much for this Jonathan! You're an absolute legend.
I tried to get Insider working on a Win7 image in Virtualbox but didn't have any luck. Insider errors while loading and doesn't detect the amp. I found your post and installed Outsider and it works a treat.
Fantastic work mate, I really appreciate you sharing it with us.
I tried to get Insider working on a Win7 image in Virtualbox but didn't have any luck. Insider errors while loading and doesn't detect the amp. I found your post and installed Outsider and it works a treat.
Fantastic work mate, I really appreciate you sharing it with us.
-
- Posts: 1
- Joined: Fri Oct 28, 2016 3:40 am
Darkstar
"Talk to the amp. You have to talk to it, Doolittle. Teach it PHENOMENOLOGY."
Darkstar is a command-line program that uses Outsider's blackstarid.py to control an amp with MIDI CC, Program Change, and the command line.
It includes instructions on getting Outsider to run on Windows. Darkstar is only tested on Windows 7 and ID:Core 40 Stereo so far.
Possible uses: use three sliders on a MIDI controller to provide 3-band EQ control, send a --volume 0 to the annoying guitarist's amp, switch the preset in time with a backing track, generally have a better time with your Blackstar!
"Talk to the amp. You have to talk to it, Doolittle. Teach it PHENOMENOLOGY."
Darkstar is a command-line program that uses Outsider's blackstarid.py to control an amp with MIDI CC, Program Change, and the command line.
It includes instructions on getting Outsider to run on Windows. Darkstar is only tested on Windows 7 and ID:Core 40 Stereo so far.
Possible uses: use three sliders on a MIDI controller to provide 3-band EQ control, send a --volume 0 to the annoying guitarist's amp, switch the preset in time with a backing track, generally have a better time with your Blackstar!
-
- Posts: 16
- Joined: Thu Oct 01, 2015 5:56 am
- Location: United States
This is awesome! Thanks so much for all your time and effort. It is greatly appreciated!
-
- Information
-
Who is online
Users browsing this forum: No registered users and 47 guests