ID 60 TVP Head output to PC speaker

Discussion - ID:Series amplifiers.
Post Reply
garciamo
Posts: 6
Joined: Mon Dec 15, 2014 4:34 am

Tue Jun 14, 2016 4:37 pm

Hi I just bought a ID TVP 60 Head. The HTV 112 cab will come in 3 weeks time. Is it possible to temporarily use my PC speakers as output if I connect the ID TVP 60 Head to the PC via USB?

Through Blackstar Insider software I was able to detect the ID TVP 60 and change the amp settings however I don't know how to bring the sound out to my PC speaker. Please help noob here.

Big thanks everyone!

longi
Posts: 62
Joined: Mon Feb 25, 2013 12:46 pm
Location: At the foot of the South Downs National Park in Blighty

Wed Jun 15, 2016 5:31 am

It doesn't do it very well, there's a lot of latency there. It's good for remaping but not playing or recording directly through.

garciamo
Posts: 6
Joined: Mon Dec 15, 2014 4:34 am

Wed Jun 15, 2016 4:45 pm

I see but how do you do it. Do you use a software like guitar rig for example? I could not get the guitar sound out from my PC speakers

Enlive
Posts: 129
Joined: Tue Apr 08, 2014 6:16 pm
Contact:

Wed Jun 15, 2016 4:50 pm

If your speakers have an aux input you would just need to run a 1/4 cable from the Emulated Output from the back of the head to the aux input with a 1/4"-1/8" adapter. Or visa versa 1/8 cable with a 1/8"-1/4" adapter to plug into the Em. Out.

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 6 guests