I'm using
- Microsoft Windows 10 Pro 64-bit (10.0.14393)
- Microsoft Silverlight 5.1.50428.0
- Blackstar Insider 1.7.9
- Blackstar ID:Core Stereo 10 (firmware version: 1.2.1)
If I launch the Insider Software
after I've connected my amp via USB (2.0 or 3.0) to my PC it just hangs on "reading amplifier patches" like this forever:
- …: Show
- frozen.jpg (158.09 KiB) Viewed 4586 times
If I launch the Insider Software
before I connect my amp it just needs a second or so to read all the patches and works well.
Every time I launch Insider it sets the "audio mode" setting to default value "stereo emulated recording".