Delay time problem with Blackstar Architect
Whenever I save a local patch with a delay time(say 300ms), every other local patches with delay effect enabled automatically sets up to 300ms delay time. This problem does not occur with amplifier patches and with the Insider software. I am using ID:Core 20 V1 btw. Is this just my unit having this issue or is it the same with other units? I have reported this issue with the Architect software few times already since this new software came out but has not been addressed with a new firmware update. I have the latest firmware i.e. 1.2.1
I am on 1.6.1 and the problem is still there. The delay times are not being saved to Local Patches, but they are saved to Amplifier Patches. Seems like a simple software fix that would make these amplifiers much more useable. The way things are, it is difficult to make changes when my band's setlist changes.
-
- Posts: 1
- Joined: Tue Mar 07, 2023 4:17 am
I'm using 1.6.1, and the issue is still present. Amplifier patches are where the delay times are saved; local patches are not where they are saved. These amplifiers could be made much more useful with a straightforward software update. When my band's setlist changes, it is currently challenging to make changes.
wordle
wordle
-
- Posts: 4
- Joined: Tue Jan 09, 2024 7:00 am
gegergg
Last edited by xotihef576 on Tue Jan 09, 2024 8:13 am, edited 1 time in total.
-
- Posts: 4
- Joined: Tue Jan 09, 2024 7:00 am
fwsfwe
Last edited by xotihef576 on Tue Jan 09, 2024 8:13 am, edited 1 time in total.
-
- Posts: 4
- Joined: Tue Jan 09, 2024 7:00 am
FRWEFRF
Last edited by xotihef576 on Tue Jan 09, 2024 8:13 am, edited 1 time in total.
-
- Posts: 4
- Joined: Tue Jan 09, 2024 7:00 am
GERGR
Last edited by xotihef576 on Tue Jan 09, 2024 8:12 am, edited 1 time in total.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 3 guests